Rectangular Wire Fastener Series M50,
Pitch 1.7 mm
Barred Fasteners
Fastener with an extra flat wire 0.65 x 0.5 mm.
This is a preferred version when an extremely flat surface is required
(e. g. a very good embedding in the belt and very low noise emission for sliding belt
surface is required).
Pitch 1.7 mm
Barred Fasteners
Fastener with an extra flat wire 0.65 x 0.5 mm.
This is a preferred version when an extremely flat surface is required
(e. g. a very good embedding in the belt and very low noise emission for sliding belt
surface is required).
Rectangular Wire Fastener Series M60,
Pitch 2.54 mm
Barred Fasteners
Fastener with a rectangular wire 0.9 x 0.7 mm.
Due to the bigger wire profile compared to the M50, the M60 fasteners provide
higher tensile strength and higher wear resistance. The rectangular wire profile
results in a very flat fill and, therefore, in a low noise level.
Pitch 2.54 mm
Barred Fasteners
Fastener with a rectangular wire 0.9 x 0.7 mm.
Due to the bigger wire profile compared to the M50, the M60 fasteners provide
higher tensile strength and higher wear resistance. The rectangular wire profile
results in a very flat fill and, therefore, in a low noise level.
Rectangular Wire Fastener Series M70,
Pitch 3.175 mm
Barred Fasteners
Fastener with a rectangular wire 1.2 x 1 mm.
Due to the bigger profile wire, the M70 fasteners provide highest tensile
strength and highest wear resistance. The rectangular wire profile results in
a very flat fill and, therefore, in a low noise level.
Pitch 3.175 mm
Barred Fasteners
Fastener with a rectangular wire 1.2 x 1 mm.
Due to the bigger profile wire, the M70 fasteners provide highest tensile
strength and highest wear resistance. The rectangular wire profile results in
a very flat fill and, therefore, in a low noise level.
Features of Rectangular Wire Fasteners:
- embed into the belt
- minimum abrasive wear
- low noise level
- kind to Belt Cleaning Systems
- embed into the belt
- minimum abrasive wear
- low noise level
- kind to Belt Cleaning Systems
