When installing the Screw System MS the belt gets compressed with the nuts. The good compression ensures a satisfying operation.
SuperUser
Saturday, 11 June 2011 11:05
MATO PATCH
MATO Flat Wire Fastener Series M50-P and M60-P (MATOPATCH) has been specifically developed for the Laundry
Industry. This patented system is a leap forward in lifetime, design, appearance and ease of installation.
Published in
Special Systems for Laundry Industry
Tagged under
Saturday, 11 June 2011 11:00
Systems R20 / R30 + R70 / R80
MATO Round Wire Fasteners are used for Light Duty Belts, depending on the demand in most of the market segments.The fastener series differ from
- Pitch (measurement from leg to leg)
- Fasteners are supplied carded or barred
- Wire diameter ranges from 0.8mm to 1.4mm
- Geometrical form (belt thicknesses from 1.6mm to 9.0mm and minimum pulley diameters from 25mm to 150mm)
- Pitch (measurement from leg to leg)
- Fasteners are supplied carded or barred
- Wire diameter ranges from 0.8mm to 1.4mm
- Geometrical form (belt thicknesses from 1.6mm to 9.0mm and minimum pulley diameters from 25mm to 150mm)
Published in
Wire Systems
Tagged under
Saturday, 11 June 2011 10:53
Systems M50 / M60 / M70
The MATO Rectangular Wire Fastener M50 / M60 / M70 Series has been specially developed for applications in the filter,airport, food, distribution, and laundry industries.
Published in
Wire Systems
Tagged under
Saturday, 11 June 2011 10:52
Hammer Systems D70/D80
The MATO Hammer System D70 / D80 Has been developed for e quick and easy Installation, without installation tool.
Published in
Standard Fasteners
Tagged under
Saturday, 11 June 2011 10:51
System S80
The Repair System S80 has been developed for rip repairs, quick and easy installation, without Lacing Tool.
Published in
Standard Fasteners
Tagged under
Saturday, 11 June 2011 10:45
Standard Fasteners MS
The Screw System MS is used for belt splicing and rip repairs.
The fasteners are easy to install and generate a good compression into the belt (vice like effect)
Published in
Standard Fasteners
Tagged under
Saturday, 11 June 2011 10:43
System H20
The High Performance Fasteners H24 have been developed for very high wear applications such as spliced belts used in Round Balers. They are proven to be the highest performing splice on the market due to high strength and long splice life and will perform equally well in other applications.
The H24 fasteners are suitable for belts in the range of 5 - 6 mm thickness and Belt Strength up to 520kN/m.
Published in
Hammer Installed Systems
Tagged under
Saturday, 11 June 2011 10:42
System EasyClip
EasyClip with pre installed staples.
Published in
Hammer Installed Systems
Tagged under
Saturday, 11 June 2011 10:41
System U20
The High Performance Fasteners U24 have been developed for very high wear applications such as spliced belts used in Round Balers. They are proven to be the highest performing splice on the market due to high strength and long splice life and will perform equally well in other applications.
The U24 fasteners are suitable for belts in the range of 4 - 7 mm thickness and Belt Strength up to 520kN/m.
Published in
Hammer Installed Systems
Tagged under
Saturday, 11 June 2011 10:38
Standard Fasteners MS
The Screw System MS is used for belt splicing and rip repairs.
The fasteners are easy to install and generate a good compression into the belt (vice like effect)
Published in
Standard Fasteners
Tagged under
